Air Venturi EVO-310 Compressor by Hill includes 1 bottle of Crankcase Oil

Air Venturi EVO-310 Compressor by Hill includes one bottle of crankcase oil

Experience the EVOlution of airgun filling with the Hill EVO-310 Air Compressor. The EVO is dialed in for high performance and built in the United Kingdom from top to bottom. Each component from the tubular metal frame down to the electronic circuit board is designed and manufactured in the UK to ensure reliable accuracy with each fill. 

This compressor is most suited to fill any PCP directly and air bottles up to and inducing 2.  It's not practical to consider this compressor for filling an 6.8L tank but it can top off such a tank from, say 3,000psi to 4500psi

Several enhancements have been made to increase its efficiency over other units. One such enhancement is the automatic air pressure purge system that strategically evacuates air during a cooling cycle, a pause in the fill, or when it’s done filling. This helps to ease any strain on the motor when it kicks back on against higher pressures and has the side benefit of discharging any moisture from inside the system.

For accuracy and to ensure that the owner doesn’t need to recalibrate during major services, this air compressor comes with a digital pressure sensor and an analog pressure gauge. The EVO has a wide range of pressure settings for many different applications and is accurate down to the last PSI. It can be set as low as 755 PSI (50 bar) all the way up to 4,500 PSI (310 bar) making it the ideal compressor to charge a wide variety of air guns.

The digital display and rotary knob are intuitive and give quick access to settings like target pressure and the ability to select units of pressure between BAR, PSI, or MPa. Making it all possible is the newly redesigned software that is designed, built, and tested to Hill’s exact standards to ensure flawless operation.

• Max Output Pressure: 4,500 PSI (310 BAR)
• Adjustable Output Pressure
• Automatic Shut-Off
• Automatic Air Pressure Purge
• Runs off of 110V outlet
• Air cooled
• Automated cool down cycle during fills 
• Digital Display
• Output hose with female quick disconnect fitting
• Adjustable Unit Display (BAR, PSI, MPa)
• Displays fill pressure and temperature (in Celcius) during the fill
• Integrated output filter with bleed valve
• Ultra quiet 75dB operation
• Length: 465mm (18.3")
• Height:  385mm (15.16")
• Width: 235mm (9.25")
• Weight: approx. 55 lbs
• Made in England

Please Note: The EVO-310 is recommended for filling PCP guns only. Do not use for breathing air.

Hill Crank Case Oil is in the perfect size bottle for the unit as it takes almost the whole 50ml bottle to fill the crank properly on the initial fill, and should not need topping up for some time.

The Silicone Oil is used all the time by the pump and should need replacing after approximately 50 hours of run time.

This item drop-ships directly to the Client from the Distributor