In Stock Tuxing 4500 psi 4500 psi PCP Compressor that runs on AC as well as car battery
Suitable for PCP air rifles, air pistols, PCP airguns,and small (1.L) HPA tanks.It takes about 20 minutes for the compressor to fill a 0.5L tank from 0 to 300 bar and 8 minutes from 200bars to 300bars. one year warranty against manufacturer defect.
If you need to fill more than 1 L of air volume. This is not for you. For that you'll need......
Read More
In Stock Tuxing 4500 psi 4500 psi PCP Compressor that runs on AC as well as car battery
Suitable for PCP air rifles, air pistols, PCP airguns,and small (1.L) HPA tanks.It takes about 20 minutes for the compressor to fill a 0.5L tank from 0 to 300 bar and 8 minutes from 200bars to 300bars. one year warranty against manufacturer defect.
If you need to fill more than 1 L of air volume. This is not for you. For that you'll need a dual cylinder compressor, which I sell..
Many people are confused when they see that a compressor can pump to 4500 or even 5500 psi. But that's not what's important. What's important is not only the fill pressure but the volume of air to be filled to that pressure. That's why this kind of compressor, a single cylinder compressor, is not suitable for filling an air tank or Airgun with the capacity of 1 L or more in any reasonable amount of time. Please take my advice.
Does not need water or oil for cooling.
Digital Display
Automatic Stop
Assembly/Operation Instructions:
- (1) Connect the power cord to compressor, connect the compressor to oil water filter and PCP tank/gun
- There is one switch inside, turn left is 110V, turn right is 220V. Pls double check it to meet your local power supply. (We will adjust it before shipping correspond to your country power supply)
- Important: Make sure the compressor is set to your local power voltage.
- (2) Tighten the screw below the compressor. Install the hose and tighten the relief valve
- (3) Connect the compressor filling hose to the air tank or other devices.
- (4) Turn on the compressor fan by press the switch (Right side button); Let the compressor fan running around 2 minutes. Turn on the compressor (Left side button)
- IMPORTANT:Start fan first, then compressor. If not, any damage or injury occurs is the responsibility of the owner and/or operator.
- (5) Turn off the compressor when the desired pressure is finished.
- Note: Let the compressor's fan run for around 2~3 minutes at least.
- (6) Turn off the fan finally.
- (7) Disconnect the fill hose from your tank, air cylinder.
Read Less